This is the very reason why you don’t build big in the first phase of advanced research, design, & development.

This is also why you don’t put all your energy design into one system.

We have been talking about this for years and yet few have had the insight to stop and listen to what we are offering to potential working partners.

Start small and stick with what has been working. Make a profit. Then grow from that operations awareness.

If you don’t know what has been working. We can’t help you. Our 1st Choice potential working partners know & have been doing it for years.

A few words on the subject. Your FEEDSTOCKS are wrong. Much less your Temp.

If selecting this Feedstock and Temp….

It is Green Chemistry that comes from the Thermo Conversion Aspects that should be considered. It is the Separation Tech that should be Advanced if you value the true profit potential as we do.

This is old, as in 2009 but it will get you up to speed on the basics, allowing for a new Biomass Fluid Catalytic Cracking (BFCC) Catalysts

Excellent People. Worthy Goal. How you don’t get cost over runs with this type of large scale objective is beyond our, proven small scale, thinking.

This is not some quick fix green race. Rather it is the Energy Business that is attempting to go green over time.

If you forget that long term fact, you will not be around, nor will your investors make money.

Case in point. The talk is of being able to use old energy refiners. Sure the integrated in the mix would like to see this, however the green in anyone who has been in this research work for over 20 years, might say, Wait a minute. Shouldn’t the Hydroprocessing REACTOR be ADVANCED?

Shouldn’t the design of the New Plant be ADVANCED. If all you are doing is talking about a MORE COSTLY Old System the cost over runs are going to be there because the old systems will also need to be advanced.

This was shown as far back as 2004. Where were some of these new green thinkers then? Even old energy Pros know they need to change how they are building their systems. That means cost overruns every time. So much so, that no one wants to go first with any new build because they know it will be outdated before it is finished, see the latest, coming out of Cal

Bottom line is this. Even the Old Energy Systems must be advanced. What is it going to cost and how long is it going to take? Don’t let anyone blow smoke up your butt. No one knows, but you can bet it will cost more and take longer than anyone attempting to promote any new idea truly understands.

Hence the reason you don’t just focus on BTL & GTL. There is far more to consider and if you are not understanding this yet. We can’t help you.

More than Willing to offer up this. It is going to take far more than any new start up can raise with some IPO. That is nothing more tnan a VC pipedream. When we say this is Large Scale, we are addressing the scope & demand of integration. This is the very reason we have been doing this with our own dime. Expect 25 years of R&D with very little hope of Rev., while in research & design mode. Energy is only one piece of a much bigger puzzle. That puzzle must be integrated, closed looped, & designed with a permaculture understanding and awareness. Old Energy doesn’t even have a CLUE in that regard and doesn’t want one either. Anyone attempting to bring green solutions to old energy design models is barking up the wrong tree and will face overruns strong enough to kill a HORSE.

The old energy integrated can afford that. Can you?

So much so, that we find ourselves seeking out the people that understand these visual and modeling methods from a truly green sustainable perspective. This means understanding integrated permaculture at the advanced BIM, Building information modeling, and GIS, geographic information system, level.

If you, or your green team, understands sustainability and is able to show green results using BIM & GIS, We want to talk to you.

Our 2012 Energy Report will include the BIM, GIS, development planning and design models needed to move forward.

The Future of development planning and design is NOW.

We welcome all truly green sustainable development planners, designers, engineers and architects as they might wish to consider assisting our green team reach our long term objectives.

Together we may seek to change development with the earth first in mind.

Half coming from U.S. Reserves

It’s called buy low, sell high. Since when has it been any different.

If you had the 727M barrels, when would you sell?

When would you buy?

There is record supply, the supply and demand is totally out of wack, & yet the price is near all time highs.

Lucky it’s not me trading that reserve. I would sell every damn barrel. Then I would short the bastard.

Then I would turn around and buy it back. I would damn sure get rid of all that sour first.

Then I would take the $39B loan protection set aside for N.P. and shift it to alternative energy production and you can bet your butt I would produce FUEL and not need a DROP OF OIL. If you’re producing power at the same time it simply means you know what the hell you’re doing. It’s called integration. Anything less is a WASTE OF MONEY.

If you are in remediation, engineering, CAD/BIM/GIS design and biobased, we want to talk to you.  It is time to form the very best biobased remediation team we are able to form and start getting the job done on the ground.

For those wanting to wait, we simply say, GET THE HELL OUT OF THE WAY & GO PLAY GOLF.

The WAITING IS OVER.

We attempted to make this point before the deadline for the new rules to KICK IN on JAN.1 and no one seemed to listen. Time and Time again we have been saying this is far more costly than most might think and yet M&A with regard to power went right on as if they simply had no care in the world. All the while this is what you might now get new in basic combined cycle systems..

http://bit.ly/eg5GAD

Keep in mind that is NEW POWER PLANT Construction not something 30 years old, or older.

Not that this is remotely like, what we might wish to build for the same, Massive Amount, of money.

Even with all our work we still don’t have a total projected number and it may be months before we do, even as we are working full bore on the project. While all of this research is private, to be sure it is FAR NORTH by a long SHOT of that old clean number. Our work has not come up with a total figure as yet but as the managing partner, I am able to say, there is no way that number is even in the ballpark.

More will be in our 2011 Power Report, however that report as are all reports will be private. That data is only provided to our private Energy Division and the Bus. Dev. Working Partners. It will also be provided to all Licensee holders.

To be sure, A Permaculture Mindset MUST BE REQUIRED, as we view BACT, IN AMERICA STARTING IN 2011

Anything short of that missed the B, as in BEST.

Dec. 21, 2010

JP

Just got this today, showing someone IS BURNING HOT WITH BRIGHT GREEN ENERGY..

http://bit.ly/fjmW7l

I am very pleased to see no NUMBERS were injected into this very important announcement and HOPE they will not be in the future as the real numbers make SHAKE The foundations of these old energy THINKERS. This REGION is in OUR WHEELHOUSE to be sure WE will want to speak to all Executives with regard to this NEW BACT, REDESIGN with CLEAN GREEN SOLUTIONS EST. in PRIVATE.

HOPE IS ALIVE and Growing Stronger by the DAY

With regard to the Site remediation $500M to $800M JOB. That should be directed by the .org that force the clean up in the first DAMN place. Read their PDF here…

http://bit.ly/gx1yqd

We are tracking over 200 companies in these different energy areas and wish to learn more about how we might work together as we are able to see business development move in a like minded direction.  If we are not already tracking your company and you feel we should be, please let us know and we will look over your profile. Keep in mind this is base load and smart onsite which is not the norm. Our objective is to produce power cheaper, cleaner, smarter with combined energy sources & seemless intergration. If you don’t have a working solution for that type of energy production potential, that can be tracked at every point in the loop, the question becomes, why not? Current research and design models have our projected cost per MW of power far cheaper than most producing alternative energy systems & designs which means all old systems currently in production are outdated and of no use to us without extensive modification, demanding major expense, & rework.

We are open to co-production agreements with current old energy systems companies that know they must transfer their plant designs which are presently outdated. This will demand feedstock transfers, production downtime, construction costs which will be extensive, not to mention major investment in new & renovated infastructure, buildings and equipment, keeping in mind these will be first time projects never produced before. Total new alternative energy cost projections are a major part of our M&A evaluation process. Those numbers are presently far more than most have projected even on a model, first phase scale.  This is in large part due to remediation which seems lost to most in the total restructure equation. Without this extensive remediation expense understanding, whatever cost number that might be reached, has missed it’s mark on a grand scale. In fact, we will not consider any future project unless we have been in charge of all remediation work during the life of the cost consideration evaluation process phase. There will not be one dime spent on any potential old energy production plant rework without first having the remediation cost projections well in hand. Here we must work side by side with both CFO and COO who are the only people who might begin to understand the merit of our clean site objectives and process.

It is also important to remember we are talking about an underground and above ground sea of pipes, wires, equipment, & roads that must be integrated. Operations must be priority one with any new design. These operations must be integrated on a large scale. This means thinking in terms of a closed loop type system. This demands CAD/BIM/GIS.

This is where our alternative fuel designs are making advances and we feel our base load power production should have the same type model. Total utilization of energy must be a major objective.

Digital Cine Doc. on this integration is in pre development to be shot on select locations U.S. domestic. with…

http://lightcine.com/